My Cart



Hennco Waterjet Supply is proud to offer’s Ebbco line of abrasive and water management products.   Ebbco is North America’s Premier metalworking filtration and fluid management company.

Ebbco’s Closed Loop Filtration System Is designed to filter and treat waterjet overflow water for reuse. This system can service single or multiple heads on any waterjet table. By using the Ebbco Closed Loop System you will eliminate the need to go to drain by recycling the water, reduce your water consumption, your costs for treated water such as RO units or water softeners, the machines maintenance and maximize the performance but most importantly, The Ebbco closed loop system protects your high-pressure pump by always supplying the manufactures specified water quality.




  • Complete Eliminate drain by recycling the water
  • Reduce water consumption by up to 90%
  • Maximize Waterjet Performance as clean treated water increases life of most components (some by as much a 2x normal life)

How It works

The Waterjet table overflows into a settling weir where sludge is settled out before entering the filtration system. Water enters the dirty side of the Stainless-Steel Reservoir on the filtration system, the filter pump sends the water first through a Stainless-Steel Bag Vessel containing a 1-micron filter bag, then a Stainless Steel Ebbco Hurricane Filter Vessel containing a 0.35 Micron Filter Cartridge. The clean water is then sent through a chiller or heat exchanger, to remove the heat from the machining process. Water if necessary, enters the Stainless-Steel DI Resin Vessel containing a special blend of resin specifically designed for waterjet applications, where dissolved solids are removed, maintaining the manufacturers pump specified water quality. Finally, the water enters the clean side of the systems reservoir. An ozone generator is installed inside the clean tank for bacteria control. Clean, treated water is then sent by a clean delivery pump through a 0.35-micron final filter to the high-pressure pump.

System Features

Closed loop for multiple Heads

The Ebbco Closed Loop Filtration System for multiple cutting heads is designed to filter up to 4 gpm, System incorporates Dual Bag Vessel, Dual Hurricane Filter Vessels and Dual DI resin Vessels and a 200 gallon reservoir for larger holding capacity.


Chillers are designed to cool the OEM’s high-pressure pumps as well as the Ebbco Closed Loop Filtration system, providing cooled DI treated water for cutting purposes to maximize high pressure pump seal life. We offer various models such as Closed Loop Chillers, In‐Line Chillers and Flow‐Thru Chillers, to work with all Waterjet manufactures high pressure pumps.

Reverse Osmosis

The Ebbco Reverse Osmosis system is used to lower the operating costs of the Ebbco Closed Loop System in applications where make‐up water quality is poor. Reverse Osmosis Systems are typically recommended when makeup water is greater than 250 ppm total dissolved solids.

Call a Hennco Waterjet Specialist today to discuss your specific water & abrasive management needs! Call 1-833-4HENNCO

Hello You!

Join our mailing list